Filter
Top Products
106
Intel
®
NetStructure™ 480T Routing Switch User Guide
Default VLAN
The switch ships with one default VLAN that has these properties:
• The VLAN name is default.
• It includes all the ports on a new or initialized switch.
The default VLAN is untagged on all ports. It has an internal
VLANid of 1.
Renaming a VLAN
To rename a VLAN, use this command:
configure vlan <old_name> name <new_name>
These rules apply to renaming VLANs:
• Once you change the default VLAN name, it cannot be changed
back to
default.
• You cannot create a new VLAN named
default.
• You cannot change the VLAN name
MacVlanDiscover.
Although the switch accepts a name change, the original name is
recreated after the switch is rebooted.
Configuring VLANs on the Switch
This section describes the commands associated with setting up
VLANs on the switch.
To configure a VLAN:
1. Create and name the VLAN.
2. Assign an IP address and mask (if applicable) to the VLAN, if
needed.
Each IP address and
mask assigned to a VLAN
must represent a unique
IP subnet. You cannot
configure the same IP
subnet on different VLANs.
3. Assign a VLANid, if any ports in this VLAN uses a tag.
4. Assign one or more ports to the VLAN.
As you add each port to the VLAN, decide if the port uses an
802.1Q tag.