Filter
Top Products
C H A P T E R 15 IP Multicast Routing
285
Configuration Examples
See Chapter 13, "RIP
and OSPF" on page
223 for information on
configuring OSPF.
In the example below, the system labeled IR1 is configured for IP
multicast routing using PIM-DM. l
Figure 15.1: IP multicast routing PIM-DM configuration
example
Configuration for IR1
The following is the configuration for the router labeled IR1:
configure vlan A0_10_0_1 ipaddress 10.0.1.2
255.255.255.0
160.26.25.2
Area 0
10.0.1.1
10.0.3.2
10.0.3.1
160.26.25.1
161.48.2.2
161.48.2.1
10.0.2.1
A0_10_0_2
A5_160_26_26
A0_10_0_3
10.0.2.2
10.0.1.2
Area 6 (stub)
Virtual link
IR 2 IR 1
ABR 1ABR 2
480t_014R
A6_161_48_2
160.26.26.2
Area 5
160.26.26.1