Filter
Top Products
Chapter 5: Rack PDU (Power Strip) Outlet Control
106
Control - Turn outlets on or off, or cycle their power.
Association - The ports associated with the outlet.
Initially, when you open the Powerstrip page, the power strips that are
currently connected to the KX II are displayed in the Powerstrip
drop-down. Additionally, information relating to the currently selected
power strip is displayed. If no power strips are connected to the KX II, a
message stating "No powerstrips found" will be displayed in the
Powerstrip Device section of the page.
Turning Outlets On/Off and Cycling Power
To turn an outlet on:
1. Click the Power menu to access the Powerstrip page.
2. From the Powerstrip drop-down, select the PX rack PDU (power strip)
you want to turn on.
3. Click Refresh to view the power controls.
4. Click On next to the outlet you want to power on.
5. Click OK to close the Power On confirmation dialog. The outlet will
be turned on and its state will be displayed as 'on'.
To turn an outlet off:
1. Click Off next to the outlet you want to power off.