Filter
Top Products
Chapter 8: Device Management
189
b. URL - Enter the URL to the interface. See Blade Chassis
Sample URL Formats (on page 203) for sample configurations
for the Dell M1000e.
c. Username - Enter the username used to access the interface.
d. Password - Enter the password used to access the interface.
Note: Leave the username and password fields blank for DRAC, ILO,
and RSA web applications or the connection will fail.
6. The Username Field and Password Field, which are both optional,
contain the labels that are expected to be associated with the
username and password entries. It is in these fields you should enter
the field names for the username and password fields used on the
login screen for the web application. You can view the HTML source
of the login screen to find the field names, not the field labels. See
Tips for Adding a Web Browser Interface (on page 195) for tips on
adding a web browser interface.
7. USB profiles do not apply to Dell chassis.
8. In the Target Settings section, select 720x400 Compensation if you
are experiencing display issues when the target is using this
resolution.
9. Select 'Use international keyboard for scan code set 3' if connecting
to the target with a DCIM-PS2 and require the use of scan code set 3
with an international keyboard.
10. Select the CIMs native, display resolution from the Display Native
Resolution drop-down. This is the preferred resolution and timing
mode of the digital CIM. Once a resolution is selected, it is applied to
the CIM.
If no selection is made, the default 1024x1280@60Hz resolution is
used.
11. Click OK to save the configuration.
To configure a Dell PowerEdge 1855/1955:
1. If you selected Dell 1855/1955, auto-discovery is not available.
Configure the blade chassis as applicable.
a. Switch Hot Key Sequence - Select the hot key sequence that will
be used to switch from KVM to the blade server. For Dell
1855/1955 models, KX II blocks all existing hot key sequences. If
you apply a Generic configuration to the Dell 1855, only one
existing hot key is blocked.
b. Maximum Number of Slots - The default maximum number of
slots available on the blade chassis is automatically entered.
c. Administrative Module Primary IP Address/Host Name - Not
applicable.