Filter
Top Products
Appendix B: Dual Video Port Groups
319
Target operating
systems
Supported mouse
modes
Comments
Mouse mode is recommended.
Linux
®
Intelligent and
Standard Mouse
Modes
Linux
®
users may experience
display and mouse movement
issues using single mouse
mode. Raritan recommends
Linux users do not use Single
Mouse mode.
Mac
®
operating
system
Single Mouse Mode
For Mac targets with multiple
monitors, use a standard
mouse in Single-Cursor mode.
CIMs Required for Dual Video Support
The following CIMs support the dual video port feature:
D2CIM-VUSB
D2CIM-DVUSB
D2CIM-DVUSB-DVI
D2CIM-DVUSB-DP
D2CIM-DVUSB-HDMI
DCIM-USBG2
Review Digital CIM Target Server Timing and Video Resolution (on
page 292) for important information regarding digital CIMs. See
Supported Computer Interface Module (CIMs) Specifications (on
page 289) for CIM specifications.
If the original CIM attached to a primary or secondary video port is
disconnected and replaced with another CIM, the port is removed from
the dual port video group. If needed, re-add the port to the group.
Note: The CIM you use depends on your target server requirements.
Dual Port Video Group Usability Notes
Following are various functions that are affected when using the dual
port video group feature.
Client Launch Settings that are configured in the Virtual KVM Client
(VKC) and Active KVM Client (AKC) clients via Tools > Options >
Client Launch Settings will be applied to dual video port groups as
follows:
Window Mode settings will be applied