Filter
Top Products
Chapter 3: Working with Target Servers
38
Port Access Page (Remote Console Display)
After successfully logging on to the KX II remote console, the View by
Port tab on the Port Access page appears. This page lists all of the KX II
ports, and the target servers, port groups, and blade chassis that are
connected to those ports.
The information is sorted by Port Number by default, but you can change
the display to sort on any of the available columns by clicking on a
column header. To increase or decrease the number of rows displayed
on a tab at one time, enter the number of row in the Rows per Page field
and click Set.
The following information for each port is contained on this page:
Port Number - Numbered from 1 to the total number of ports
available for the KX II device.
Note: Ports connected to power strips are not listed, resulting in gaps
in the Port Number sequence.
Port Name - The name of the KX II port. Initially, this is set to
Dominion-KX2-Port# but you can change the name to something
more descriptive. When you click a Port Name link, the Port Action
Menu appears.
Note: Do not use apostrophes for the Port (CIM) Name.
Type - The type of server or CIM/DCIM.
For blade chassis, the type can be Blade Chassis, Blade,
BladeChassisAdmin, and BladeChassisURL.
Dual video port groups appear on the Port Access page as Dual Port
types.
The primary and secondary ports that are a part of the port group
appear on the Port Access page as Dual Port(P) and Dual Port(S),
respectively. For example, if the CIM type is DCIM, "DCIM Dual Port
(P)" is displayed.