Filter
Top Products
Chapter 8: Device Management
164
Use the Link to SNMP Agent Configuration link to quickly navigate to the
Devices Services page from the Event Management - Settings page.
The events that are captured once an SNMP trap is configured are
selected on the Event Management - Destination page. See
Configuring Event Management - Destinations (on page 169).
KX II supports SNMP logging for SNMP v1/v2c and/or v3. SNMP v1/v2c
defines message formats and protocol operations when SNMP logging is
enabled. SNMP v3 is a security extension of SNMP that provides user
authentication, password management and encryption.
To edit existing SNMP traps:
1. Choose Device Settings > Event Management - Settings. The Event
Management - Settings page opens.
2. Make changes as needed and click OK to save the changes.
Note: If you disable SNMP settings at any time, the SNMP information is
retained so you do not have to reenter if you re-enable the settings.
To delete SNMP traps:
Clear all of the SNMP trap fields and save.