Filter
Top Products
Chapter 8: Device Management
145
Note: Because a failover port is not activated until after a failover has
actually occurred, Raritan recommends that you not monitor the port
or monitor it only after a failover occurs.
When this option is enabled, the following two fields are used:
Ping Interval (seconds) - Ping interval determines how often the
KX II checks the status of the network path to the designated
gateway. The default ping interval is 30 seconds.
Timeout (seconds) - Timeout determines how long a designated
gateway remains unreachable via the network connection before
a fail over occurs.
Note: The ping interval and timeout can be configured to best meet
the local network conditions. The timeout should be set to allow for at
least two or more ping requests to be transmitted and responses
returned. For example, if a high rate of failover is observed due to
high network utilization, the timeout should be extended to 3 or 4
times the ping interval.
4. Select the Bandwidth.
5. Click OK to apply the LAN settings.
Device Services
The Device Services page allows you to configure the following
functions:
Enable SSH access
Configure HTTP and HTTPS port settings
Enable tiering for the base KX II
Enter the discovery port
Enable direct port access
Enable the AKC Download Server Certificate Validation feature if you
are using AKC
Enabling SSH
Enable SSH access to allow administrators to access the KX II via the
SSH v2 application.
To enable SSH access:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Select Enable SSH Access.