Filter
Top Products
Appendix F:
372
Question
Answer
What about mouse
synchronization?
In the past, KVM-over-IP mouse
synchronization was a frustrating experience.
The Dominion KX II’s Absolute Mouse
Synchronization provides for a tightly
synchronized mouse without requiring server
mouse setting changes on Windows and
Apple® Mac servers. For other servers, the
Intelligent Mouse mode or the speedy, single
mouse mode can be used to avoid changing
the server mouse settings.
What comes in the Dominion KX II
box?
The following is included: (1) Dominion KX II
unit, (2) Quick Setup Guide, (3) standard 19"
rack mount brackets, (4) user manual
CD-ROM, (5) network cable, (6) crossover
cable, (7) localized AC line cord and (8)
warranty certificate and other documentation.
Blade Servers
Question
Answer
Can I connect blade servers to the
Dominion KX II?
Yes. Dominion KX II supports popular blade
server models from the leading blade server
manufacturers: HP®, IBM®, Dell® and Cisco®.
Which blade servers are
supported?
The following models are supported: Dell
PowerEdge® 1855, 1955 and M1000e; HP
BladeSystem c3000 and c7000; IBM
BladeCenter® H, E and S; and Cisco UCS
B-Series.
Are the Paragon® Blade CIMs
used?
No. The Dominion KX II does not require the
use of special blade server CIMs like the
Paragon II.
Which CIM should I use?
It depends on the type of KVM ports on the
specific make and model of the blade server
you are using. The following CIMs are
supported: DCIM-PS2, DCIM-USBG2,
D2CIM-VUSB and D2CIM-DVUSB.
Which types of access and control
are available?
The Dominion KX II provides automated and
secure KVM access: (1) at the rack, (2)
remotely over IP, (3) via CommandCenter and
(4) by modem.