Filter
Top Products
Appendix A: Specifications
298
If a connection to the target is in place from the other KX II, the
availability is checked when a connection is attempted. Access is denied
or allowed consistent with the PC-Share policy in place for the KX II.
Until that time, the availability is not be updated on the other KX II.
If access is denied because the target is busy, a notification is displayed.
Working from CC-SG
Operations initiated from CC-SG are based on the Status, Availability
and CIM name reported by the managed KX II. When the target is
connected to two managed KX IIs and the devices are added to CC-SG,
two nodes will be created. Each node will have its own oob-kvm interface
associated with it. Alternatively, a single node can be configured with an
oob-kvm interface from each KX II.
If the KX IIs are configured for ‘Private’ mode, when a second connection
is attempted the user is notified that they cannot connect and access is
denied.
When a port name change is initiated via the CC-SG Port Profile pane,
the changed name is pushed to the managed KX II. The corresponding
port name of the other KX II will not be updated in CC-SG until a
connection is attempted to the target port via the other KX II’s oob-kvm
interface.
KX II-to-Paragon II Guidelines
The P2CIM-APS2DUAL or P2CIM-AUSBDUAL can be connected to a
KX II and Paragon II.
Concurrent Access
The KX II and Paragon II must be configured with the same policy for
concurrent access to targets.
Paragon II
operation
mode
Mode description
Supported?
Private
A server or other device
on a specific channel
port can be accessed
exclusively by only one
user at a time.
Supported.
Paragon II and the KX II
must be set to Private. The
Private setting is applied on
to KX II device, not per user
group.
The Paragon II uses Red to
indicate ‘busy’ or Green to
indicate ‘available’.
PC Share
A server or other device
on a specific channel
Supported.
However, PC Share Idle