Filter
Top Products
Chapter 13: KX II Local Console
279
Configuring KX II Local Port Settings from the Local Console
The standard local port and the extended local port can be configured
from the Remote Console on the Port Configuration page, or from the
Local Console on the Local Port Settings page.
See Configuring KX II Local Port Settings (on page 206) for details on
configuring these ports.
KX II Local Console Factory Reset
Note: This feature is available only on the KX II Local Console.
Note: It is recommended that you save the audit log prior to performing a
factory reset.
The audit log is deleted when a factory reset is performed and the reset
event is not logged in the audit log. For more information about saving
the audit log, see Audit Log (on page 239).
To perform a factory reset:
1. Choose Maintenance > Factory Reset. The Factory Reset page
opens.
2. Choose the appropriate reset option from the following options:
Full Factory Reset - Removes the entire configuration and resets
the device completely to the factory defaults. Note that any
management associations with CommandCenter will be broken.
Because of the complete nature of this reset, you will be
prompted to confirm the factory reset.
Network Parameter Reset - Resets the network parameters of
the device back to the default values (click Device Settings >
Network Settings to access this information):