Filter
Top Products
Chapter 3: Working with Target Servers
48
Note: MPC uses a different method for initiating a scan than the other
Raritan clients. See Set Scan Group in the KVM and Serial Client
Guide for details. The scan results and scan options differ between the
Remote Console and the Local Console. See Scanning Ports - Local
Console (on page 269).
To scan for targets:
1. Click the Set Scan tab on the Port Access page.
2. Select the targets you want to include in the scan by selecting the
checkbox to the left of each target, or select the checkbox at the top
of the target column to select all targets.
3. Leave the Up Only checkbox selected if you only want targets that
are up to be included in the scan. Deselect this checkbox if you want
to include all targets, whether up or down.
4. Click Scan to begin the scan.
As each target is scanned, it is displayed in slide show view on the
page.
5. Click Options > Pause to pause the slide show and stop it from
moving between targets, click Options > Resume to resume the slide
show.
6. Click on a target thumbnail to scan it next.
7. Connect to a target by double clicking on its thumbnail.