Filter
Top Products
Chapter 7: User Management
121
Permission
Description
settings.
If you are using a tiered configuration in which
a base KX II device is used to access multiple
other tiered devices, user, user group and
remote authentication settings must be
consistent across all devices.
Setting Port Permissions
For each server port, you can specify the access type the group has, as
well as the type of port access to the virtual media and the power control.
Please note that the default setting for all permissions is Deny.
Port access
option
Description
Deny
Denied access completely
View
View the video (but not interact with) the connected
target server.
Control
Control the connected target server. Control must be
assigned to the group if VM and power control access
will also be granted.
In order for all users in a user group to see KVM
switches that are added, each user must be granted
Control access. If they don't have this permission and
a KVM switch is added at a later time, they will not be
able to see the switches.
Control access must be granted for audio or smart
card related controls to be active.
VM access
option
Description
Deny
Virtual media permission is denied altogether for the
port.
Read-Only
Virtual media access is limited to read access only.
Read-Write
Complete access (read, write) to virtual media.