Filter
Top Products
Chapter 8: Device Management
177
If you are using an HDMI CIM, some operating system/video card
combinations may offer a limited range of RGB values. Improve the
colors by selecting the DVI Compatibility Mode checkbox.
Apply Selected Profiles to Other CIMs
1. Apply the profile to other CIMs by selecting them from the list in the
Apply Selected Profiles to Other Ports section of the Port
Configuration page.
Apply a Native Display Resolution to Other CIMs
1. Apply the native display resolution to CIM to other CIMs of the same
type by selecting the ports other CIMs are connected to from the list
in the Apply Native Resolutions to Other Ports section of the Port
Configuration page.
Configuring Rack PDU (Power Strip) Targets
The KX II allows you to connect rack PDUs (power strips) to KX II ports.
KX II rack PDU configuration is done from the KX II Port Configuration
page.
Note: Raritan recommends no more than eight (8) rack PDUs (power
strips) be connected to a KX II at once since performance may be
affected.