Filter
Top Products
Chapter 8: Device Management
176
Configuring CIM Ports
The KX II supports the use of standard and virtual media CIMs to
connect a server to the KX II.
To access a CIM to configure:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name of the target server you want to rename. The
Port Page opens.
Configure the CIM Settings
1. Select Standard KVM Port as the subtype for the port.
2. Assign a name to identify the server connected to that port. The
name can be up to 32 characters, and alphanumeric and special
characters are allowed.
Configure the CIM Power Associations
1. In the Power Association section, associate a power strip with the
port, if needed.
Configure the CIM Target Settings
1. In the Target Settings section, select 720x400 Compensation if you
are experiencing display issues when the target is using this
resolution.
2. For digital CIMs, to set the target's video resolution to match your
monitor's native display resolution, select the resolution from the
Display Native Resolution drop-down.