Filter
Top Products
Chapter 3: Working with Target Servers
42
On the local port, the KX II Local Console interface must be visible in
order to perform the switch.
Hot key switching is also available from the local port.
Note: This option is not available from the KX II Remote Console for
an available port if all connections are busy.
Switch From - Switches from an existing connection to the selected
port (KVM target server).
This menu item is available only for KVM targets, and only when a
Virtual KVM Client is opened.
Note: This menu item is not available on the KX II Local Console.
Disconnect - Disconnects this port and closes the Virtual KVM Client
page for this target server.
This menu item is available only when the port status is up and
connected, or up and busy.
Note: This menu item is not available on the KX II Local Console.
The only way to disconnect from the switched target in the Local
Console is to use the hot key.
Power On - Powers on the target server through the associated
outlet.
This option is visible only when there are one or more power
associations to the target, and when the user has permission to
operate this service.
Power Off - Powers off the target server through the associated
outlets.
This option is visible only when there are one or more power
associations to the target, when the target power is on (port status is
up), and when user has permission to operate this service.
Power Cycle - Power cycles the target server through the associated
outlets.
This option is visible only when there are one or more power
associations to the target, and when the user has permission to
operate this service.