Filter
Top Products
Appendix A: Specifications
310
Port
Description
By default, this port is used for multiple purposes, including the web
server for the HTML client, the download of client software
(Multi-Platform Client (MPC) and Virtual KVM Client (VKC)) onto the
client's host, and the transfer of KVM and virtual media data streams to
the client.
KX II (Raritan
KVM-over-IP)
Protocol,
Configurable Port
5000
This port is used to discover other Dominion devices and for
communication between Raritan devices and systems, including
CC-SG for devices that CC-SG management is available.
By default, this is set to Port 5000, but you may configure it to use any
TCP port not currently in use. For details on how to configure this
setting, see Network Settings (on page 141).
SNTP (Time Server)
on Configurable
UDP Port 123
The KX II offers the optional capability to synchronize its internal clock
to a central time server.
This function requires the use of UDP Port 123 (the standard for
SNTP), but can also be configured to use any port of your designation.
Optional
LDAP/LDAPS on
Configurable Ports
389 or 636
If the KX II is configured to remotely authenticate user logins via the
LDAP/LDAPS protocol, ports 389 or 636 will be used, but the system
can also be configured to use any port of your designation. Optional
RADIUS on
Configurable Port
1812
If the KX II is configured to remotely authenticate user logins via the
RADIUS protocol, either port 1812 will be used, but the system can also
be configured to use any port of your designation. Optional
RADIUS Accounting
on Configurable Port
1813
If the KX II is configured to remotely authenticate user logins via the
RADIUS protocol, and also employs RADIUS accounting for event
logging, port 1813 or an additional port of your designation will be used
to transfer log notifications.
SYSLOG on
Configurable UDP
Port 514
If the KX II is configured to send messages to a Syslog server, then the
indicated port(s) will be used for communication - uses UDP Port 514.
SNMP Default UDP
Ports
Port 161 is used for inbound/outbound read/write SNMP access and
port 162 is used for outbound traffic for SNMP traps. Optional
TCP Port 22
Port 22 is used for the KX II command line interface (when you are
working with Raritan Technical Support).
SSH
(Secure Shell) SSH port can be configured. The default is port 22.
Telnet
Telnet port can be configured but is not recommended. The default port
is 23.