Filter
Top Products
Appendix F:
380
Question
Answer
How do I connect the PDU to
the Dominion KX II?
The D2CIM-PWR is used to connect the
power strip to the Dominion KX II. The
D2CIM-PWR must be purchased
separately; it does not come with the PDU.
Does Dominion KX II support
servers with multiple power
supplies?
Yes. Dominion KX II can be easily
configured to support servers with multiple
power supplies connected to multiple
power strips. Four power supplies can be
connected per target server.
Does the Dominion KX II
display statistics and
measurements from the
PDU?
Yes. PDU-level power statistics, including
power, current and voltage, are retrieved
from the PDU and displayed to the user.
Does remote power control
require any special
configuration of attached
servers?
Some servers ship with default BIOS
settings such that the server does not
automatically restart after losing and
regaining power. For these servers, see
the server’s documentation to change this
setting.
What happens when I
recycle power to a server?
Note that this is the physical equivalent of
unplugging the server from the AC power
line, and reinserting the plug.
Can I power on/off other
equipment (non-servers)
connected to a PDU?
Yes. You can power on/off other
equipment attached to the PDU by outlet
from the Dominion KX II’s browserbased
interface.
Local Port Consolidation, Tiering and Cascading