Filter
Top Products
Appendix A: Specifications
302
Target Server Requirements
When using smart card readers, the basic requirements for
interoperability at the target server are:
The IFD (smart card reader) Handler must be a standard USB CCID
device driver (comparable to the generic Microsoft
®
USB CCID
driver).
A digital CIM or D2CIM-DVUSB (Dual-VM CIM) is required and must
be using firmware version 3A6E or later.
Blade chassis server connections, where a CIM per blade is used,
are supported.
Blade chassis server connections, where a CIM per chassis is used,
is only supported for IBM
®
BladeCenter
®
models H and E with
auto-discovery enabled.
Windows XP Targets
Windows XP
®
operating system targets must be running Windows XP
SP3 in order to use smart cards with the KX II. If you are working
with .NET 3.5 in a Windows XP environment on the target server, you
must be using SP1.
Linux Targets
If you are using a Linux
®
target, the following requirements must be met
to use smart card readers with the Raritan device.
CCID Requirements
If the Raritan D2CIM-DVUSB VM/CCID is not recognized as a smart
card reader by your Linux target, you may need to update the CCID
driver version to 1.3.8 or above and update the driver configuration
file (Info.plist).
Operating system
CCID requirements
RHEL 5
ccid-1.3.8-1.el5
SuSE 11
pcsc-ccid-1.3.8-3.12
Fedora
®
Core 10
ccid-1.3.8-1.fc10.i386