Filter
Top Products
Chapter 8: Device Management
172
Alternatively, rename ports that are currently not connected to
the KX II via a CIM and, as such, have a status of Not Available.
To rename a port with a status of Not Available, do one of the
following:
Rename the port. When a CIM is attached the CIM name will
be used.
Rename the port, and select 'Persist name on Next CIM
Insertion'. When a CIM is attached the name that has been
assigned will be copied into the CIM.
Reset the port, including the name, to factory defaults by
selecting 'Reset to Defaults'. When a CIM is attached the
CIM name will be used.
Note: Do not use apostrophes for the Port (CIM) Name.
Port Type:
DCIM - Dominion CIM
TierDevice - Tier device
Not Available - No CIM connected
PCIM - Paragon CIM
PowerStrip (rack PDU) - Power strip connected
Dual - VM - Virtual media CIM (D2CIM-VUSB and
D2CIM-DVUSB)
Blade Chassis - Blade chassis and the blades associated
with that chassis (displayed in a hierarchical order)
KVM Switch - Generic KVM Switch connection
DVM-DP - Display Port
DVM-HDMI - HDMI CIM
DVM-DVI - DVI CIM
2. Click the Port Name for the port you want to edit.
For KVM ports, the Port page for KVM and blade chassis ports is
opened.
For rack PDUs, the Port page for rack PDUs (power strips) is
opened. From this page, you can name the rack PDUs and their
outlets.