Filter
Top Products
Chapter 2: Installation and Configuration
22
If either of these checkboxes is selected and only power input is
connected, the power LED on the front of the device is Red.
Configure Date/Time Settings (Optional)
Optionally, configure the date and time settings.
The date and time settings impact SSL certificate validation if LDAPS is
enabled.
Use the Date/Time Settings page to specify the date and time for the KX
II. There are two ways to do this:
Manually set the date and time.
Synchronize the date and time with a Network Time Protocol (NTP)
server.
To set the date and time:
1. Choose Device Settings > Date/Time. The Date/Time Settings page
opens.
2. Choose your time zone from the Time Zone drop-down list.
3. Adjust for daylight savings time by checking the "Adjust for daylight
savings time" checkbox.
4. Choose the method to use to set the date and time:
User Specified Time - use this option to input the date and time
manually. For the User Specified Time option, enter the date and
time. For the time, use the hh:mm format (using a 24-hour clock).
Synchronize with NTP Server - use this option to synchronize the
date and time with the Network Time Protocol (NTP) Server.
5. For the Synchronize with NTP Server option:
a. Enter the IP address of the Primary Time server.
b. Enter the IP address of the Secondary Time server. Optional
Note: If DHCP is selected for the Network Settings on the Network
page, the NTP server IP address is automatically retrieved from the
DHCP server by default. Manually enter the NTP server IP address
by selecting the Override DHCP checkbox.
6. Click OK.