Sharp MX-2301N All in One Printer User Manual


 
4-71
FACSIMILE
Contents
3
Select 2in1.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
SPECIAL MODES (page 4-60)
(3) Touch the [2in1] key so that it is
highlighted.
(4) Touch the [OK] key.
4
Display the original settings screen.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Original] key.
5
Specify the orientation in which the
original is placed.
(1)
Touch the appropriate [Image Orientation] key.
If this setting is not correct, a suitable image may not be
transmitted.
(2) Touch the [OK] key.
6
Press the [BLACK & WHITE START] key.
Scanning begins.
If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
If you are scanning the original on the document glass, scan each page one page at a time.
When scanning finishes, place the next original and press the [BLACK & WHITE START] key. Repeat until all pages have
been scanned and then touch the [Read-End] key.
A beep will sound to indicate that scanning is finished.
The [Configure] key can be touched in the scan-end confirmation screen to change the exposure, resolution, scan size, and
send size. (However, when scanning each even-numbered page of the original, only the exposure can be changed.)
To cancel scanning...
Press the [STOP] key ( ).
Transmission is not possible at a size smaller than the original size.
This function cannot be used in direct transmission mode or when the speaker is used to dial.
The 2in1 function cannot be used when the original is other than A4, B5 or A5 (8-1/2" x 11" or 5-1/2" x 8-1/2") size.
When the scan size of the original is specified by numerical values, this function cannot be used.
To cancel 2in1...
Touch the [2in1] key in the screen of step 3 so that it is not highlighted.
Fax
Special Modes
OK
1/3
Program
Timer Card Shot
Erase
Dual Page
Scan
2in1
(3)
(4)
Auto
Exposure
Standard
Resolution
Original
Special Modes
Quick File
File
Special Modes
Sub Address
Address Book
Fax
Mode Switch
Job Detail
Settings
Direct TX
Memory TX
Auto Reception
Fax Memory:100%
Auto A4
(2)(1)
Fax
Original
OK
Auto
Scan Size Send Size
100%
Image Orientation
2-Sided
Booklet
2-Sided
Tablet
Auto A4
(2)
(1)