Filter
Top Products
7-126
SYSTEM SETTINGS
Contents
Enable/Disable Settings
The following settings are used to prohibit the use of certain functions. Touch the [Enable/Disable Settings] key and
configure the settings.
Printer Condition Settings
Disable Blank Page Print
This setting is used to disable blank page printing.
User Control
Disabling of Printing by Invalid User
Printing by users who do not enter valid user information in
the printer driver or who are not stored in the machine for
FTP push print or other direct print jobs can be prohibited.
To enable this setting, select the checkbox and
touch the [OK] key.
Operation Settings
Cancel Auto Clear Timer
This setting is used to disable Auto Clear.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Job Priority Operation
The job priority function can be disabled. When this is done,
the [Priority] key will not appear in the job status screen.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Bypass Printing
This setting is used to disable bypass printing (printing
other jobs ahead of a job that has been stopped* because
the paper required for the job is not in any of the trays).
To enable this setting, select the checkbox and
touch the [OK] key.
* This does not include cases where the paper ran out
during the job.
Disable Auto Key Repeat
This setting is used to disable the auto key repeat function.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Clock Adjustment
This setting is used to prohibit changing of the date
and time.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Covers/Inserts Mode
This setting is used to prohibit the use of the covers
and inserts function.
To enable this setting, select the checkbox and
touch the [OK] key.
Device Control
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic
document feeder, such as when the feeder
malfunctions. (When the setting is enabled, scanning
is still possible using the document glass.)
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Duplex
This is used to disable two-sided printing, such as
when the duplex module malfunctions.
To enable this setting, select the checkbox and
touch the [OK] key.
Disabling of Optional Paper Drawer
(When an optional paper drawer is installed.)
This setting is used to disable the optional paper
drawer, such as when it malfunctions.
To enable this setting, select the checkbox and
touch the [OK] key.
The Enable/Disable Settings control the same parameters as other settings such as the Printer Condition Settings. The
settings are linked together (changing one setting changes the other).