Filter
Top Products
5-81
SCANNER/INTERNET FAX
Contents
4
Select job build mode.
(1) Touch the keys to switch through
the screens.
(2) Touch the [Job Build] key so that it is
highlighted.
(3) Touch the [OK] key.
5
Press the [COLOUR START] key or the [BLACK & WHITE START] key to scan the
first set of originals.
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation.
6
Insert the next set of originals and press the [COLOUR START] key or the
[BLACK & WHITE START] key.
Press the [START] key pressed in step 5.
Repeat until all originals have been scanned.
To cancel scanning...
Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared.
7
Touch the [Read-End] key.
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original
page scanned. However, when Job Build is used in combination with "2in1" in the special modes, only the exposure
can be changed when scanning each even-numbered page of the original pages.
If the memory becomes full during scanning, a message will appear and the transmission will be cancelled.
To cancel the job build function....
Touch the [Job Build] key in the screen of step 4 so that it is not highlighted.
Scan
Special Modes
OK
2/3
Job
Build
File
Quick File
Slow Scan
Mode
Mixed Size
Original
Original
Count
(2) (3) (1)
Place next original. (Pg.No.x)
Press [Start].
When finished, press [Read-End].
Read-EndConfigure