7-142
SYSTEM SETTINGS
Contents
5
Touch the [Sub Address] key.
6
Enter a sub-address and passcode.
(1) Enter a sub-address.
Enter a sub-address with the numeric keys (maximum of
20 digits).
(2) Enter a passcode.
Touch the [Passcode] key and enter a passcode with the
numeric keys (maximum of 20 digits).
If you do not need to store a passcode, go to the next
step.
(3) Touch the [OK] key.
• " " and "#" cannot be used in a sub-address.
• When the [Passcode] key is touched, "/" appears.
If an incorrect entry is made...
Press the [CLEAR] key ( ) and enter the correct digits.
7
Touch the [Exit] key.
To program another memory box...
Touch the [Next] key and repeat the procedure from step 4.
No.001
ExitNext
Box Name
Polling Memory
Sub Address
F-Code Memory Box / Polling Memory
Next Exit
OKCancel
No.001
Sub Address / Passcode
Enter the sub address / passcode via the 10-key pad,then press [OK].
Passcode
000000 / 111111
F-Code Memory Box / Polling Memory
(1) (2) (3)
F-Code Memory Box / Polling Memory
No.001
ExitNext
Box Name
Polling Memory
000000/111111
Sub Address
Registration is completed.