7-97
SYSTEM SETTINGS
Contents
Detect Standard in Auto Colour
Mode
When colour mode is set to auto in copy mode, five
levels are available for the detection of the original.
Specify the number with the keys. When the
"Closer to B/W" setting is configured, it makes the
original easier to be detected as black and white original.
When the "Closer colour" setting is configured, it makes
the original easier to be detected as a colour original.
Fusing Control Settings
These are used to control the toner fusing temperature
according to the weight of the paper.
These settings apply to plain paper, recycled paper,
punched paper, pre-printed paper, letterhead paper,
coloured paper, and user type paper.
You can select "60g/m
2
to 89g/m
2
" or "90g/m
2
to
105g/m
2
" ("16 to 23 lbs." or "23+ to 28 lbs.").
• Be sure to use only paper that is in the same weight
range as the weight range set here. Do not mix
plain or other paper that is outside the range with
the paper in the tray.
• When settings are changed, the changes will take
effect after the machine is restarted. To restart the
machine see "TURNING THE POWER ON AND
OFF" (page 1-12) in "1. BEFORE USING THE
MACHINE ".