Filter
Top Products
7-157
SYSTEM SETTINGS
Contents
ECM
Line conditions can sometimes distort a transmitted fax
image. When ECM (Error Correction Mode) is turned on,
pages that are distorted are automatically re-transmitted.
To enable this setting, select the checkbox and
touch the [OK] key.
This setting is enabled by factory default.
Distinctive Ring Detection
This Setting can only be activated in Canada, Australia,
New Zealand, and Hong Kong.
If multiple telephone numbers have been assigned to
your telephone line, the number called can be identified
by its ringing pattern. By using one number for voice
calls and another number for faxes, you can tell which
type of call you are receiving by the ringing pattern. You
can set your machine to automatically receive faxes
when your fax number is called by setting the pattern
that corresponds to your fax number. (Note that in
Canada, six selections are available.)
To use this setting, touch the key of the desired pattern
and touch the [OK] key.
PBX Setting
This Setting can only be activated in France, Germany.
When the machine is used on a PBX, you can enable
the PBX setting to have the machine automatically
connect to the outside line. When this setting is enabled,
the [R] key appears in the base screen. When the [R]
key is touched, the PBX setting is temporarily cancelled.
To enable the PBX setting, select the [PBX Connection]
checkbox and specify the method for connecting to
the outside line.
If your PBX uses the Flash method to connect to the outside
line, touch the [Flash] key and then touch the [OK] key.
If your PBX uses an ID number to connect to the outside
line, touch the [ID] key, specify the ID number with the
keys, and touch the [OK] key.
If the other machine supports Super G3, ECM will
function regardless of this setting.
Enter a number for the first digit and then a number or
a hyphen "-" for the second and third digits.