Filter
Top Products
4-90
FACSIMILE
Contents
INITIATING POLLING RECEPTION MANUALLY
Use this procedure when you must start polling after listening to a recorded greeting, such as when using a fax
information service.
• Make sure that an original is not placed in the machine when using the polling reception function.
• This function cannot be used to poll multiple machines (serial polling).
1
Enter the destination fax number.
(1) Touch the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Touch the [Address Book] key in the base
screen.
(3) Touch the one-touch key of the desired
destination.
A group key cannot be used.
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see "ENTERING DESTINATIONS" (page 4-16).
• After touching the [Speaker] key, you can touch the [Speaker Volume] key to adjust the volume of the speaker. The
speaker volume changes each time the [Speaker Volume] key is touched. Adjust the volume to the desired level.
2
Receive the fax.
(1) Touch the [Job Detail Settings] key.
(2) Touch the [Special Modes] key.
☞ SPECIAL MODES (page 4-60)
(3) Touch the keys to switch through
the screens.
(4) When you hear the fax tone, touch the
[Polling] key.
The fax is received.
• This function can only be used when the other machine is Super G3 or G3 compatible and has a polling function.
• The receiving machine bears the expense (phone charges) of the polling reception.
AAA AAA
CCC CCC
EEE EEE
DDD DDD
BBB BBB
FFF FFF
1/1
Telephone mode.
Resend
Speaker
Speaker Volume
Condition
Settings
Freq. QRSTU
VWXYZ
Freq.
ABCD
EFGH
IJKL MNOP
etc.
To
Cc
Sort Address
(3) (1)
3/3
Verif.
Stamp
Transaction
Report
Own Name
Select
Memory Box
Polling
OK
Fax
Special Modes
(4) (3)