Filter
Top Products
7-146
SYSTEM SETTINGS
Contents
Programming an F-code Memory Box (Relay Broadcast)
Follow the steps below to program a memory box for F-code relay broadcast transmission. The sub-address and
passcode that you program in the memory box will be required when the other machine performs an F-code relay
request transmission (asks your machine to relay a fax). In addition, you will also store the fax numbers of the end
receiving machines (up to 30) in the memory box.
• When programming a new memory box, a sub-address that is already programmed in another box cannot be used.
However, the same passcode can be used for more than one memory box.
• A total of 100 F-code memory boxes for all functions (polling memory, confidential, and relay broadcast) can be stored.
When 100 memory boxes are stored, no further memory boxes be stored. Delete unnecessary memory boxes and then
store a new memory box.
☞Editing and Deleting F-code Memory Boxes (page 7-149)
• A passcode does not need to be stored if the other machine does not use a passcode.
1
Touch the [Address Control] key.
2
Touch the [F-Code Memory Box] key.
3
Touch the [Relay Broadcast] key in the
"Store" (upper) row of keys.
4
Enter a box name.
(1) Touch the [Box Name] key.
The box number (No.) that automatically appears is the
lowest number that has not yet been programmed.
(2) Enter a box name on the text entry screen
that will appear.
Enter up to 18 characters for the name.
System Settings
Admin Password
Default Settings
Total Count
Address Control
Exit
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
System Settings
Address Control
OK
F-Code Memory Box
Custom Index
Direct Address / Program
System Settings
F-Code Memory Box
OK
ConfidentialPolling Memory
ConfidentialPolling Memory
Amend/Delete
Relay
Broadcast
Relay
Broadcast
Store
F-Code Memory Box / Relay Broadcast
No.001
ExitNext
Box Name
Sub Address
Recipient