Filter
Top Products
7-120
SYSTEM SETTINGS
Contents
Reception Check Interval Setting
This is used to specify the interval at which the machine
automatically checks the mail server (POP3 server) for
received Internet faxes. The interval can be set from 0
minutes to 8 hours in increments of 1 minute.
When 0 hours 0 minutes is specified, the machine does
not automatically check the mail server for received
Internet faxes.
Select the "Hour" key and "Minute" key, specify the
values with the keys, and touch the [OK] key.
(To make the number change quickly, keep your finger
on the or key.)
Allow/Reject Mail or Domain Name
Setting
This setting is used to allow or refuse reception from
specified addresses/domains.
To refuse reception from specified addresses/domains,
select the [Reject Reception] key and touch the [OK]
key.
When permitting only reception from the address or the
domain that you program, touch the [Allow Reception]
key and then the [OK] key.
To allow reception from all addresses/domains even
when there are addresses/domains specified, select [All
Invalid].
Up to 50 addresses/domains can be stored.
1
Touch the [Enter] key and enter the
address or domain.
A maximum of 64 characters can be entered. After you
have entered the address/domain, touch the [OK] key.
2
Touch the [OK] key.
To store another address/domain, repeat the procedure
from step 1. Addresses/domains will be stored in
succession.
1
Touch the [Delete] key.
Touch the address or domain that you wish to delete in the
list of stored addresses/domains. A confirmation message
will appear. Touch the [Yes] key.
2
Touch the [OK] key.
I-Fax Output Setting
(When a right tray is installed.)
Set the output tray when Internet fax is received.
Select the desired key (the keys will vary depending on
the machine configuration) and touch the [OK] key.
The machine also checks the mail server (POP3) for
received Internet faxes when it is powered on. (Except
when 0 hours 0 minutes is specified.)
Storing addresses/domains
System Settings
Allow/Reject Mail or Domain Name Setting
Allow/Reject Mail Setting
Enter
Allow Reception
Reject Reception
All Invalid
Delete
OK
• When there are no stored anti junk mail addresses,
only the [Enter] key can be selected.
• If the first character of the entry is not "@", the entry
is identified as an address. If the first character is
"@", the entry is identified as a domain.
(xxx@xx.xxx.com is treated as an address, and
@xx.xxx.com is treated as a domain.)
• Storing an address specifies only that address.
Storing a domain specifies all addresses that
include that domain.
Deleting