7-139
SYSTEM SETTINGS
Contents
10
Enter the destination fax number.
(1) Enter the destination fax number with the
numeric keys.
(2) Touch the [OK] key.
• Entering a pause between digits of the number...
Touch the [Pause] key at the place where you wish to enter a pause. The entered pause appears as a hyphen "-".
• To enter an F-code (sub-address and passcode)...
(1) Enter the destination fax number with the numeric keys.
(2) Touch the [Sub Address] key.
"/" appears.
(3) Enter the sub address with the numeric keys (maximum of 20 digits).
(4) Touch the [Sub Address] key.
"/" appears.
(5) Enter the passcode with the numeric keys (maximum of 20 digits).
A passcode is not necessary if the destination machine does not use a passcode.
• The destination fax number can be a maximum of 64 digits including all numbers and characters. However, only the
first 32 digits will appear in the display.
• When (2) is performed, the number entered to that point is stored and "Registration is completed." will appear.
If an incorrect entry is made...
Press the [CLEAR] key ( ) and enter the correct digits.
11
Touch the keys to switch
through the screens.
12
Check the name of the key .
The name appearing next to the [Key Name] key will be
displayed in the one-touch key.
To change the key name, touch the [Key Name] key, edit the
name, and then touch the [OK] key.
Up to 18 characters can be entered for the key name.
Direct Address / Individual
Next Exit
OKCancel
No.001
Fax No.
Enter the Fax No. via the 10-Key pad, then press [OK].
Pause
Sub Address
0123456789
(1) (2)
A
0123456789
Initial
Fax No.
Index
Direct Address / Individual
Key Name
Next
2/2
User1
Exit
AAA AAA
E-mail
Direct SMTPInternet Fax
Fax
Search Number
001
Registration is completed.
Mode
Direct Address / Individual
Key Name
Next
2/2
33.6 kbps/None
Exit
AAA AAA
E-mail
Direct SMTPInternet Fax
Fax
Search Number
001
Registration is completed.