Filter
Top Products
7-140
SYSTEM SETTINGS
Contents
13
Check the International Correspondence
Mode.
The setting is displayed next to the [Mode] key
To change the setting, follow these steps:
(1) Touch the [Mode] key.
(2) Touch one of the transmission speed keys.
(3) Touch one of the International
Correspondence Mode keys.
(4) Touch the [OK] key.
• Transmission speed
33.6 kbps, 14.4kbps, 9.6kbps or 4.8kbps can be selected for the transmission speed. Higher numbers are higher
transmission speeds.
Set the transmission speed only when you know what speed is most suitable, such as when you are sending a fax
to a foreign country and telephone line conditions are bad. If you do not know the line conditions, do not change this
setting.
• International Correspondence Mode
None, Mode 1, Mode 2, or Mode 3 can be selected for the International Correspondence Mode.
When sending a fax to a foreign country, telephone line conditions can sometimes distort the fax or interrupt the
transmission. If errors frequently occur when sending a fax to a foreign country, try each of modes 1 to 3 and select
the mode that enables the best transmission.
14
Touch the [Exit] key.
If you wish to store another destination...
Touch the [Next] key and repeat the procedure from step 4.
• A total of 999 one-touch keys and group keys can be stored.
• It will not be possible to store a group if this has been prohibited using "Disable Registering Destination from Operation
Panel" (page 7-111) in the system settings for fax (administrator).
Direct Address / Individual
Key Name
Exit
2/2
AAA AAA
Next
Mode
33.6 kbps/None
Registration is completed.
Search Number
001
E-mail
Internet Fax Direct SMTP
Fax
(1)
Direct Address / Individual
No.001
Next Exit
OK
Transmission Mode
Transmission Speed International Correspondence Mode
33.6 kbps
None
9.6 kbps 4.8 kbps
14.4 kbps
Mode 3Mode 2
Mode 1
(4)(3)(2)
Direct Address / Individual
Key Name
Exit
2/2
AAA AAA
Next
Mode
33.6 kbps/None
Registration is completed.
Search Number
001
E-mail
Internet Fax Direct SMTP
Fax