Filter
Top Products
2-69
Master Effects Memory (E-MEM) Subpanel
For the above register functions, pressing ↑, UNDO repeatedly
allows you to toggle back and forth between the two last states.
(For toggling UNDO, you have to press ↑/BANK then UNDO each
time.)
NOTE:
Editing operations such as Cut, Copy, Paste, and Mod cannot
be undone with the
UNDO
function on the E-MEM keypad.
TRAN RATE is used with the keypad to set the transition/mix rates
used by the AUTO TRAN (auto transition), KEY MIX, and DSK MIX
buttons on the Transition subpanels, and by the EFF DIS button on
the E-MEM keypad.
When TRAN RATE is pressed, the E-MEM display queries:
SET WHICH RATE?
and any Enable buttons that are on turn off.
The transition rate is then delegated to the desired Transition
subpanel by pressing M/E 1, M/E 2, M/E 3 (3000-3 only), PGM PST, or
DSK
. All of these functions may be enabled simultaneously by
pressing ENABL ALL.
NOTE:
When
TRAN RATE
has been selected,
ENABL ALL
enables only
those levels that have programmable transition rates
(M/E 1, M/E 2
,
M/E
3 (3000-3 only)
,
BKGD, DSK,
and
PGM PST
).
After the desired levels are enabled, the display queries:
RATE = ? (3000-2)
or
AUTO RATE = ? (3000-3)
(This is the first of 3 rates that the display will ask for.)
TRAN
RATE