Filter
Top Products
2-46
Section 2 — Control Panel Descriptions
PRI WIPE WASH on the M/E Matte subpanel selects the primary
(Transition) wipe generator to modulate between the two mattes
during a wash. Pressing and holding this button allows you to
change the transition softness with the HUE/SOFTNESS knob and
the offset (position) with the SATURATION/OFFSET knob.
SEC WIPE WASH causes the secondary (optional) wipe generator
to be used to modulate between the two mattes in a wash.
Holding down this button performs the same function as with PRI
WIPE WASH
.
USER DEF WASH on the DSK Matte subpanel selects the user wash
generator to modulate between the two mattes during a wash.
The USER DEF WASH pattern is a straight line that can be rotated
via the USER DEF WASH ANGLE soft knob located in the Matte
menu. (This menu may be opened by double-pressing the USER
DEF WASH
button.)
When USER DEF WASH is held down, the HUE/SOFTNESS knob
adjusts the transition softness, the SATURATION/OFFSET knob
adjusts the transition offset (position), and the BRIGHT/TEX knob
adjusts the texture.
The texture consists of a random-like pattern (the same as the
texture wipe pattern) that is mixed with the USER DEF WASH
pattern. To control the texture, you make adjustments in the same
manner as the wipe texture control, except that the buttons are in
the Matte Texture menu.
PRI
WIPE
WASH
SEC
WIPE
WASH
USER
DEF
WASH