Filter
Top Products
3-76
Section 3 — Menu Descriptions
For CLEAR REG:
CLEAR ALL
— For all enabled levels, clears all data from all
100 registers, making them empty. After CLEAR ALL is
pressed, a submenu allows you to CONFIRM or CANCEL the
operation.
CLEAR BANK — For all enabled levels, clears all data from all
registers in the bank whose number is displayed in the menu.
After CLEAR BANK is pressed, a submenu allows you to
CONFIRM
or CANCEL the operation.
CLEAR REG — For all enabled levels, clears all data from the
register whose number is displayed in the menu, making it an
empty register. After
CLEAR REG is pressed, a submenu
allows you to CONFIRM or CANCEL the operation.
To clear a Master E-MEM function (3000-3), deselect all M/E
enables and then use the menu clear buttons.
For LOCK REG:
LOCK ALL, UNLOCK ALL — For all currently enabled levels,
locks or unlocks all 100 registers. If any registers are unlocked,
a LOCK ALL selection is displayed; if any or all registers are
locked, an UNLOCK ALL selection is displayed.
LOCK BANK, UNLOCK BANK — For all currently enabled
levels, locks or unlocks all registers in the bank whose number
is displayed in the menu. Note that the current bank
displayed may not be the same as the current bank for
independent E-MEM levels. If so, the current bank will not get
locked on those levels, but the selected bank will.
For the currently displayed bank number, if any currently-
enabled E-MEM level has an unlocked register in the bank, a
LOCK BANK
instruction is displayed. When all registers in the
bank are locked, an UNLOCK BANK instruction is displayed.
LOCK REG, UNLOCK REG — For all currently enabled levels,
locks the register whose number is displayed in the menu.
Note that this may not be the current register for some levels.