Filter
Top Products
3-7
Configuration Menu
Clear Key Memory Menu
The Clear Key Memory Menu allows you to clear key memory
settings for selected areas of the switcher.
The Clear Key Memory Menu selections are as follows:
SECTION SELECT and BUS SELECT — Select the area of the
switcher whose key memory you wish to clear.
After selecting the section and bus, press the specific
crosspoint desired on the selected bus. (The number of that
crosspoint will appear in the CURRENT XPT box in the menu.)
When DSK is the section selection, bus selections are KEY 1
and KEY 2. When AUX is selected, bus choices are 1 through 7.
And when MASK is selected, the BUS SELECT and CLEAR
SECTION
choices disappear.
CLEAR XPT, CLEAR BUS, CLEAR SECTION, and CLEAR SWITCHER
— Perform the Clear operation for the selected memory area.
CLEAR KEY MEMORY MENU
config / user prefs / keyer prefs / clear key mem
BUS
SELECT
CURRENT
XPT
SECTION
SELECT
CLEAR
XPT
CLEAR
SECTION
CLEAR
BUS
CLEAR
SWITCHER
M/E 2
M/E 3
DSK
AUX
MASK
B
KEY 1
KEY 2
7
Press a button below to clear key memory for –
CLEAR XPT: the current xpt on the selected bus
CLEAR BUS: all xpts on the selected bus
CLEAR SECTION: all xpts on all buses in the selected section
CLEAR SWITCHER: all xpts in the switcher
M/E 1
A