Filter
Top Products
3-11
Configuration Menu
Define Defaults Menu
The Define Defaults Menu allows you to change the default values
that are stored in memory and used when the switcher is turned
on.
The Define Defaults Menu selections are as follows:
M/E SELECT — Selects the M/E whose settings are to be used
during power-up. (Only one set of values is stored for the M/Es,
therefore both M/Es use the same values at boot-up.) The
switcher panel (including the selected M/E) is used to set up the
switcher default values.
SET DEFAULT — Enters the new default values.
GVG DEFAULT — Restores the factory-set default values to the
switcher.
DEFINE DEFAULTS MENU
config / user prefs / define defaults
M/E
SELECT
M/E 1
Set Default State to Current Switcher State. All M/Es will use settings.
Set Default State to GVG Factory Default.
SET
DEFAULT
GVG
DEFAULT
M/E 3
M/E 2
M/E 1