2-122
Section 2 — Control Panel Descriptions
The three RU panel (Figure 2-25) has large buttons and is designed
for locations where it is desirable to operate more than one bus.
This panel will normally control all aux buses but can be set up to
lock out specific buses.
As many as 32 Remote Aux Panels can be attached to one switcher.
Source Selection
The Remote Aux Panels are designed to control 48
primary inputs (24 unshifted and 24 shifted) and four
re-entry inputs.
Each crosspoint lamp on the two or three RU panel will high tally
when that input is on air. There is an ON AIR lamp on the one RU
panel which will illuminate to indicate that the selected input is on
air. The on-air tally can be permanently enabled on all panels.
Grass Valley Group
SOURCE
DELEGATE
1
2
4
35678
9
10 11
12
13
14 15 16
17
18 19 20 21
22 23
24
SHIFT
M/E
1
M/E
2
M/E
3
PGM
AUX
1A
AUX
1B
AUX
2A
AUX
2B
AUX
3A
AUX
3B
AUX
4A
AUX
4B
AUX
5A
AUX
5B
AUX
6A
AUX
6B
AUX
7A
AUX
7B
AUX
8A
AUX
8B
AUX
9A
AUX
9B
Figure 2-25. Three RU Remote Aux Control Panel
1
...
PGM