Filter
Top Products
2-26
Section 2 — Control Panel Descriptions
Recalling Effects
To recall a register, press the following buttons:
BANK, bank number, register number
(The previous
NOTE
for learning applies also to recalling.)
When an E-MEM register is recalled, the key memory for any
recalled crosspoint is updated.
Crosspoint Override
During an E-MEM recall, if you don’t want the crosspoint to
change, you can manually hold down the present crosspoint
button while the E-MEM register is recalled. If key memory is off
at this time, the video and key crosspoint are held. If key memory
is on, the video and key crosspoint and the current keyer memory
state are held.
Mix/Effects E-MEM Keypad
In addition to learning and recalling effects, the
E-MEM keypad is used as a numerical entry pad for
the following buttons: TRAN RATE, LRN, LRN SEQ,
LOCK
, and BANK.
Pushing a numerical button at any time other than
when preceded by one of the above buttons recalls
the corresponding register within the current bank.
To recall a register in a different bank, enter the recall
sequence described on the previous page.
SEQ
BANK
EFF
DIS
LOCK
LRN
4
UNDO
•
1
7
0
8
6
TRAN
RATE
9
BANK
0
BANK
1
5
32
NO REG
ENTER
RUN