Filter
Top Products
3-40
Section 3 — Menu Descriptions
Peripheral Triggers Menu
This menu allows you to configure peripheral triggers that the
switcher may use to trigger the designated device/function.
These triggers can then be learned into E-MEM effects (on the
MISC or DPM 1–DPM 4 level). Refer to the Keyframe/Attach
Peripheral Trigger Menu description for attaching peripheral
triggers to E-MEM registers.
TRIGGER SELECT — Selects the trigger to be assigned (A - H).
DEVICE NUMBER — Selects the peripheral device to which a
trigger will be sent.
FUNCTION NUMBER — Sets the function of the selected device
that will be triggered by a trigger message on the Peripheral II
bus.
LEVEL — Sets the E-MEM level where the trigger will be
learned.
FIRE ... — Manually fires the trigger, for testing purposes.
PERIPHERAL TRIGGERS MENU
config / extern if / peripheral if / peripheral triggers
TRIGGER
SELECT
FIRE
B
LEVEL
= DPM 1
FUNCTION NUMBER
= 4
A
C
D
E
F
G
H
DEVICE NO.
-
-
-
-
-
-
-
FUNCTN NO.
-
-
-
-
-
-
-
LEVEL
-
-
-
-
-
-
-
B
14B DPM 1
DEVICE NUMBER
= 1