Filter
Top Products
3-74
Section 3 — Menu Descriptions
The following selections are available under the E-MEM Menu:
REGISTER> — Displays the E-MEM Register Menu.
SOURCE HOLD> — Displays the Source Hold Menu.
PERIPH DEVICES> — Displays the Peripheral Devices Menu.
RUN LEVER — Enables or disables the Run lever arm to manually
move the Time Cursor along the timeline and manually run
keyframe effects. DISABLE may be used in a live situation to avoid
problems that might arise from bumping the lever arm.
KEYFRAME EDITING — Enables/disables keyframe editing mode.
This activates the effects editing buttons on the E-MEM panel,
allowing multiple-keyframe effects to be built and modified.
ENABLE — Enables keyframe editing mode, which activates
the effects editing buttons on the E-MEM panel (low tally) and
allows multiple-keyframe effects to be built and modified.
DISABLE — Disables keyframe editing and turns off the
effects editing buttons.
KF PATHS> — Displays the Keyframe Paths Menu, which allows
the type of path to be set for interpolation of parameters between
keyframes.
GPI & PBUS TRIGGERS — Displays the GPI and PBUS Trigger
Menu.