Filter
Top Products
3-91
Keyframe Timeline Menu
■ If the last keyframe on a timeline has a pause and a new
keyframe is inserted after it, the next-to-last keyframe will
then have the pause.
■ If the first keyframe on an individual level’s timeline has
a pause and the beginning of that timeline is skewed with
respect to the beginning of the overall effect, the effect
stops on that pause if the effect is running on the Master
Timeline (Auto Run off).
■ If the last keyframe on an individual level’s timeline has a
pause and that timeline is not as long as the overall effect,
the entire effect stops on that pause if the effect is running
on the Master Timeline (
Auto Run off).
TIME ALIGN LEVELS — Adjusts the start times of all delegated
levels so that their current times align.
SET START TIME — Sets the start time (time of the first keyframe)
of all delegated levels to the time of the cursor. The relative timing
of all keyframes within a level remains unchanged; only the start
times of delegated levels are changed.
TIME SELECT — Selects the function of the TIME knob, as follows:
RUN — Runs the current effect with the delegated soft knob.
Usage is the same as the E-MEM subpanel RUN button. Only
enabled levels are activated in this operation.
RUN DEL — Runs multiple keyframe effects in their relative
time position.
START — Adds a delay to where the keyframe begins.
KF —“Slides” a delegated keyframe timeline relative to the
next/previous keyframe. Durations remain fixed. If CONST
DUR is set, the overall effect duration is unaffected.
EFF DUR — “Slides “ the overall effect duration; scales the
delegated levels.
NOTE:
Other soft button and soft knob functions that appear in the
Timeline Menu under specific conditions are discussed in the User
Guide.