Filter
Top Products
3-92
Section 3 — Menu Descriptions
Aux Bus Menu
The Aux Bus Menu allows you to select or deselect looping mode
on Aux Buses 1 through 4 for use with the Effects Send feature.
You can also assign the video and key sources to be used for the
Effects Send loop and assign them to the the near and/or far side
of a DPM rotation effect.
The following selections are available from the Aux Menu:
BUS SELECT — Selects the logical (and physical) aux bus to be
assigned to an effects send loop. Logical buses are those bus
numbers that are assigned to physical buses via menu mapping.
Physical buses (shown in parentheses) are the actual bus outputs.
EFF LOOP MODE — Turns the effects send loop on (EXT LOOP) or
off (NO LOOP) for the selected (highlighted) bus. When AUX 4 is
selected, a FRAME STORE selection is added for using the Frame
Store in the effects send loop. (The Frame Store option must be
present for this selection to be functional.)
AUX BUS MENU
aux bus
LOG AUX
SELECT
EFX LOOP
MODE
AUX BUS 1
NO LOOP
PVW BUS
MASK BUS
AUX BUS 2
AUX BUS 3
AUX BUS 4
AUX BUS 5
AUX BUS 6
AUX BUS 7
NO LOOP
NO LOOP
NO LOOP
NO LOOP
NO LOOP
NO LOOP
NO LOOP
NO LOOP
PVW BUS
MASK BUS
AUX BUS 2
AUX BUS 3
AUX BUS 4
AUX BUS 5
AUX BUS 6
AUX BUS 7
EXT LOOP
LOGICAL PHYSICAL
AUX BUS 1 EXT LOOPAUX BUS 1