Filter
Top Products
3-58
Section 3 — Menu Descriptions
Key 1 NAM Menu
The Key 1 NAM Menu allows NAMing Key 2 into Key 1 on an
M/E-by-M/E basis.
Selections in the Key 1 NAM Menu are as follows:
M/E SELECT — Selects the M/E to be set.
NAM K2 INTO K1 — Enables or disables NAMing Key 2 into Key 1.
In this mode, the signal with the highest instantaneous value is
passed.
NAM SOFTNESS — Adjusts the softness of the transition
between two video signals for the selected M/E.
NAM OFFSET — Sets the transition threshold between the two
video signals (similar to a clip adjustment).
NOTE:
When NAMing Key 2 into Key 1, Key 2 will be on the M/E
output but not indicated by a key
ON
indicator. (The crosspoint button
tally will be correct.)
RESTORE DEFAULTS — Restores the default values of the selected
soft knob functions.
KEY 1 NAM MENU
keyer / key 1 nam
M/E
SELECT
NAM K2
INTO K1
NAM SOFTNESS
= 0%
NAM OFFSET
= 50%
RESTORE
DEFAULTS
M/E 2
M/E 3
KEY 1
KEY 1
OFF
OFF
M/E 1 KEY 1 ON
M/E 1
OFF
M/E 2
M/E 3
ON