Filter
Top Products
3-39
Configuration Menu
Peripheral Interface Menu
The Peripheral Interface Menu allows you to set up the
parameters for the Peripheral Bus II port (A3).
BAUD and PARITY — Select the baud rate and parity parameters
for the Peripheral Bus II port interface. These should be set to be
the same for the Model 3000 and the peripheral device.
PERIPHERAL TRIGGERS> — Displays the Peripheral Triggers
Menu, which allows you to define the triggers to be sent to devices
on the peripheral bus.
PERIPHERAL INTERFACE MENU
config / extern if / peripheral if
PERIPHERAL
TRIGGERS >
NOTE:
The Peripheral Bus port is labelled
"Port A3" on the rear of the frame
electronics.
EVEN
PARITYBAUD
38400
ODD
NONE
2400
4800
9600
19200