Filter
Top Products
3-137
Disk Menu
M/E 1 through MASTER E-MEM — Select portions of the E-MEM
register data or switcher Configuration data to be included or
omitted when saving it to disk.
SAVE SELECT — Selects the type of save to be done. The switcher
serial protocol for use with Editors has been enhanced to support
the transfer of E-MEM registers to and from an Editor. This allows
an Editor to save its decision list (E DL) together with the switcher
E-MEMs on one diskette. Refer to your Editors Operations
Manual to see if this feature is supported by your Editor.
REGISTER = — Selects a single register to be saved. When E-MEM
BANK
is selected, 10 registers at a time can be saved. When E-MEM
ALL
is selected, all 100 registers may be saved in one operation.
NAME FILE> — Displays the Name File Menu for you to name the
file(s) that you wish to create on the disk. For an E-MEM file, an
automatic extension is added to the file name on the disk (for
example, .R24 for register 24). If an E-MEM bank or if all E-MEM
registers are saved, a separate file is created on the disk for each
E-MEM register.