Filter
Top Products
2-85
Master Effects Memory (E-MEM) Subpanel
KF DUR allows you to change the duration of the current keyframe
or to set the duration of a keyframe to be inserted. If not all
delegated levels are on a keyframe, or if different delegated levels
have differing keyframe durations, pressing KF DUR will add an
appropriate change to the current keyframe duration on all levels.
When pressed, KF DUR high-tallies and the E-MEM display shows
the current keyframe duration:
KF DUR SSS:FF.f
where SSS=Seconds, FF=Frames, and f=field(s) of the desired
keyframe duration.
A new duration may be entered as follows on the E-MEM keypad:
[S] [S] [S] [•] [F] [F] [•] [f] [ENTER]*
The keyframe duration is then applied to all delegated levels by
pressing MOD once.
__________________
*Not all digits are required for defining the time. The system will
recognize the • button presses to determine which digits are
seconds, which are frames, and which are fields. For instance, to
enter 2 seconds and 5 frames (65 frames or 130 fields), you would
need only to enter:
[2] [•] [5] [ENTER]
or [•] [6] [5] [ENTER]
or [•] [•] [1] [3] [0] [ENTER]
In all of these cases, the display will show:
KF DUR 002:05.0
KF
DUR