3Com 5000/6000 Network Router User Manual


 
10 3Com Router 5000/6000 Family
Command Reference
binary
Use the binary command to set data type to binary for file transfer.
FTP Client view
boot bootrom
Use the boot bootrom command to upgrade BootRom.
System view
boot bootrom
Use the boot bootrom command to upgrade BootRom.
System view
bootfile backup
Use the bootfile backup command to specify the backup boot file.
System view
bootfile dir
Use the bootfile dir command to view information about all the boot files in the Flash, including file type,
date, time, file size, and file name.
System view
bootfile main
Use the bootfile main command to specify the main boot file.
System view
bridge aging-time
Use the bridge aging-time command to configure the aging time of the dynamic address table.
System view
bridge bridge-set enable
Use the bridge bridge-set enable command to enable the specified bridge set.
System view
bridge bridging
Use the bridge bridging command to enable the bridging function of a network layer protocol on a
specified bridge set.
System view
bridge enable
Use the bridge enable command to enable the bridging function.
System view
bridge learning
Use the bridge learning command to enable forwarding by dynamic address table.
System view
bridge mac-address
Use the bridge mac-address command to manually configure a static address table entry of bridge.
System view
bridge routing
Use the bridge routing command to enable the routing function of a specified bridge-set for the specified
network protocol.
System view
bridge routing-enable
Use the bridge routing-enable command to enable the routing function of the bridge.
System view
bridge-set
Use the bridge set command to add an interface to a bridge set.
Interface view
Bridge Template view
bridge-set (Ethernet Interface view)
Use the bridge-set (in the Ethernet Interface view) command to add the Ethernet interface into the
bridge.
Ethernet Interface view
bridge set (Synchronous Serial Interface view)
Use the bridge-set (in Synchronous serial interface system view) command to add the
synchronous serial interface encapsulated into SDLC into the bridge group.
Synchronous Serial Interface view