Filter
Top Products
96 3Com Router 5000/6000 Family
Command Reference
lr percent
1Use the lr percent command to configure LR.
Traffic Behavior view
ls
Use the ls command to query for a specified file/directory.
FTP Client view
ls
Use the ls command to view the files in the specified directory as you would with the dir command.
SFTP Client view
lsp-trigger
Use the lsp-trigger command to configure topology-triggered LSP creation policy.
MPLS view
mac-address
Use the mac-address command to configure Mac address of virtual Ethernet interface.
Virtual Ethernet Interface view
mac-address timer aging
Use the mac-address timer aging command to set the aging timer for the MAC address table on the port.
Ethernet Port view
mandatory-chap
Use the mandatory-chap command to force LNS to perform CHAP authentication again with the client.
L2TP Group view
mandatory-lcp
Use the mandatory-lcp command to allow LNS and client to renegotiate Link Control Protocol (LCP)
between them.
L2TP Group view
map bridge
Use the map bridge command to establish the IPoEoA mapping or PPPoEoA mapping on the PVC.
PVC view
map bridge-group
Use the map bridge-group broadcast command to enable the PVC to transmit and receive BPDUs.
PVC view
map clns
Use the map clns command to create a CLNSOA mapping for a PVC.
ATM PVC view
map ip
Use the map ip command to create IPoA mapping for PVC.
PVC view
map ppp
Use the map ppp command to create a PPPoA map on the PVC.
PVC view
map routed-bridge
Use the map routed-bridge command to configure routed bridge encapsulation on the PVC.
ATM PVC view
match
Use the match command to configure a PVC group to differentiate traffic by the Precedence or DSCP
identifier in the TOS field of the IP header.
ATM Pvc-Group view
match-template
Use the match-template command to configure the match template for a voice entity.
Voice Entity view
max-call (in Voice Dial Program View)
Use the max-call command to configure max-call sets (128 sets at most).
Voice Dial Program view
max-call (in Voice Entity View)
Use the max-call command to bind a voice entity to the max-call set specified by set-number.
Voice Entity view