Filter
Top Products
152 3Com Router 5000/6000 Family
Command Reference
ttl propagate
Use the ttl propagate command to enable IP TTL duplication of MPLS.
MPLS view
tunnel authentication
Use the l2tp tunnel authentication command to enable L2TP tunnel authentication.
L2TP Group view
tunnel avp-hidden
Use the tunnel avp-hidden command to configure Attribute Value Pair (AVP) data to be transmitted in
hidden format.
L2TP Group view
tunnel flow-control
Use the tunnel flow-control command to enable L2TP tunnel flow-control.
L2TP Group view
tunnel local
Use the tunnel local command to set the local address of an ipsec policy.
Manually-Established IPSec Policy view
tunnel keepstanding
Use the tunnel keepstanding command to enable the tunnel-hold function of L2TP, preventing the tunnel
from being disconnected when no session is present.
L2TP Group view
tunnel name
Use the tunnel name command to specify local name of a tunnel.
L2TP Group view
tunnel-on
Use the tunnel-on command to enable tunnel function.
VoIP Voice Entity view
tunnel password
Use the tunnel password command to specify a password for tunnel authentication.
L2TP Group view
tunnel-protocol dvpn
Use the tunnel-protocol udp dvpn command to encapsulate a tunnel interface with UDP DVPN.
Tunnel Interface view
tunnel-protocol gre
Use the tunnel mode command to set encapsulation mode of the tunnel interface to GRE.
Tunnel interface view
tunnel remote
Use the tunnel remote command to set the remote address of an ipsec policy.
Manually-Established IPSec Policy view
tunnel timer hello
Use the tunnel timer hello command to set a Hello packet forwarding interval.
L2TP Group view
type
Use the type command to configure the analog E&M subscriber-line signal type.
Voice Subscriber-Line view
type-number
Use the type-number command to configure the calling/called number types of voice entities.
Voice Entity view
udp-helper enable
Use the udp-helper enable command to enable UDP Helper.
System view
udp-helper port
Use the udp-helper port command to specify the UDP port number in the UDP broadcasts to be
forwarded.
System view
udp-helper server
Use the udp-helper server command to configure the destination server to which the UDP broadcasts
received on the interface are forwarded.
Ethernet Interface view